100% Free • No Sign-up • 2026

Gravel Calculator (2026)

Find out exactly how much gravel you need, in cubic yards, tons, bags and cost.

Calculate Your Gravel

Density used: all gravel types in this calculator use the same disclosed density of 1.4 tons per cubic yard (about 2,800 lb per cubic yard). The gravel type you pick only changes the guide note below the results, not the math.

Measure the longest side of the area in feet.

Measure the shortest side of the area in feet.

Driveways usually need 3 to 4 inches; garden paths 2 to 3 inches.

Type changes the guide note only. The math is identical for all three.

Leave blank for no cost estimate. Delivery fees are not included.

Area
Volume
Volume
Weight
50 lb bags needed
Estimated material cost

Order about 10% extra for settling and uneven ground. That extra is a guide suggestion only: it is NOT added into the results above, so add it yourself before ordering.

Bag count is rounded up to whole bags. Delivery, tax and spreading labour are not included in the cost estimate.

How the Gravel Calculation Works

First, multiply length by width to get the area in square feet. Then convert the depth from inches to feet, multiply by the area, and you have the volume in cubic feet. Divide by 27 to get cubic yards, because one cubic yard holds 27 cubic feet. Finally, multiply cubic yards by 1.4 to get tons, since this calculator uses a single disclosed density of 1.4 tons per cubic yard for every gravel type.

Area (sq ft) = length (ft) x width (ft)
Volume (cu ft) = area x (depth in inches / 12)
Volume (cu yd) = volume (cu ft) / 27
Weight (tons) = volume (cu yd) x 1.4
Bags (50 lb) = round up (weight in lb / 50)
Cost = weight (tons) x price per ton

Worked Example: 20 by 10 Feet at 3 Inches Deep

With the default values, the area is 20 x 10 = 200 square feet. The volume is 200 x 0.25 feet = 50 cubic feet, which is 50 / 27 = 1.85 cubic yards. At 1.4 tons per cubic yard, that is 2.59 tons, or about 5,185 lb. Dividing by 50 lb gives 103.7, rounded up to 104 bags. At $45 per ton, the material cost is 2.59 x $45 = $116.67.

Gravel Coverage Table: Cubic Yards Needed

Use this table for a quick check before you measure. Find your area, then read across to your planned depth. For irregular shapes, measure the area in sections and add the sections together.

Area 2 inches deep 3 inches deep 4 inches deep 6 inches deep
100 sq ft 0.62 cu yd 0.93 cu yd 1.23 cu yd 1.85 cu yd
200 sq ft 1.23 cu yd 1.85 cu yd 2.47 cu yd 3.70 cu yd
500 sq ft 3.09 cu yd 4.63 cu yd 6.17 cu yd 9.26 cu yd
1,000 sq ft 6.17 cu yd 9.26 cu yd 12.35 cu yd 18.52 cu yd

Remember the 10% rule: the table shows the exact volume for a perfectly level area. Real ground is rarely perfect, so ordering about 10% extra covers settling and low spots. That extra is not built into the calculator results above.

Which Gravel Type Should You Choose?

Pea gravel is small, smooth and comfortable to walk on, which makes it a popular pick for paths, patios and play areas. Its rounded stones do shift underfoot, so it is less ideal for steep slopes or heavy vehicle traffic. Crushed stone has angular edges that lock together, giving a firmer surface that holds up well under cars, so it is the usual choice for driveways and parking areas. River rock is larger, rounded and decorative, and it works best as a visible top layer in garden beds and around landscaping rather than as a driving surface. All three use the same density in this calculator, so your choice affects looks and performance, not the quantity maths.

How Deep Should Gravel Be?

  • Garden paths and walkways: 2 to 3 inches over landscape fabric is usually enough for foot traffic.
  • Patios and seating areas: 3 inches gives a stable, comfortable surface that still drains well.
  • Driveways: 3 to 4 inches of gravel over a compacted base layer. For heavy vehicles, a deeper compacted base matters more than extra top gravel.
  • Drainage areas and French drains: depth depends on the trench, not the surface, so measure the trench cross-section instead of the surface area.

Bags or Bulk Delivery: Which Is Cheaper?

For small jobs under about 1 cubic yard, bags from a garden centre are convenient and easy to carry, but you pay far more per ton. Bulk delivery by the cubic yard or ton is almost always cheaper for driveways and larger areas, and the supplier tips it where you need it. The break-even point is usually around 1 to 2 cubic yards: if the calculator shows more than that, get a bulk quote before buying bags. Always confirm whether the quoted price includes delivery, because delivery fees can change the comparison completely.

Tips Before You Order

  • Measure twice, in sections. Split L-shaped or curved areas into rectangles, calculate each one, and add them together.
  • Compact in layers. For driveways, spread and compact in 2-inch layers rather than dumping the full depth at once.
  • Use landscape fabric under paths. It stops weeds and keeps gravel from sinking into soft soil, which also keeps your depth honest.
  • Edge it. Metal, timber or stone edging keeps gravel where it belongs and stops it spreading onto lawns.
  • Check access. Make sure a delivery truck can reach the spot, or plan where the pile will sit and how far you will wheelbarrow it.

Frequently Asked Questions

It depends on size and depth. A 20 by 10 foot driveway at 3 inches deep needs about 2.59 tons. Enter your own length, width and depth in the calculator above for an exact figure, then add about 10% extra for settling.

40 bags. One ton is 2,000 lb, and 2,000 divided by 50 equals 40. The calculator rounds the bag count up, so you never end up one bag short.

3 to 4 inches of gravel over a compacted base is the usual range for a residential driveway. Lighter garden paths need only 2 to 3 inches. Depth matters more than area for the final quantity, so measure it carefully.

It can work for light use, but crushed stone is usually better for driveways because its angular edges lock together and resist rutting. Pea gravel shifts under tyres and is better suited to paths and patios.

Yes, order about 10% extra for settling and uneven ground. That extra is a guide suggestion only and is not added into the calculator results, so add it yourself before ordering.

No. The cost estimate covers material only, at the price per ton you enter. Delivery fees, tax and labour are extra, so ask your supplier for a delivered price before you commit.
Disclaimer: Estimate only. Actual gravel weight varies by stone type, size and moisture content, and supplier densities differ. Confirm the delivered quantity and price with your supplier before ordering.

Scroll to Top
Featured on FreeStartupDirectoriesListed on Tool Index